home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-21 / qwhite.zip / SK-PLUS.TEC < prev    next >
Text File  |  1992-03-09  |  6KB  |  102 lines

  1. ID:SK SideKick Plus in DESQview
  2. Quarterdeck Technical Note #151
  3. by Stan Young
  4. last revision:  12 February 1992
  5.  
  6. SideKick Plus can be run in DESQview, but will typically require a great deal 
  7. more memory than the original SideKick (Version 1.5).  While Borland makes a 
  8. point in its advertising that SideKick Plus takes no more than 64K of memory, 
  9. THIS IS WHEN SIDEKICK IS NOT ACTIVE!  When SideKick Plus is active, it takes 
  10. between 256K and 440K depending on the number of SideKick utilities installed 
  11. and the size of their data.  If you have problems of any kind while running 
  12. SideKick Plus in a window, try giving it more memory.
  13.  
  14. General SideKick Plus Setup:
  15.  
  16. In general, set up SideKick Plus as you normally would.  The only suggestions 
  17. would be that you disable SideKick's background communications facility and 
  18. that if you have expanded memory, set up your modules in SideKick to use it.  
  19. Also, since memory is a consideration, we would suggest you install only the 
  20. modules you intend to use and for those utilities that expand themselves 
  21. within the module (such as Notepad, giving the option of 1 to 9 notepads), 
  22. avoid making them bigger than you need.
  23.  
  24. Alt Key conflict:
  25.  
  26. After bringing up SideKick Plus with the activate key and opening a utility, 
  27. you can bring up the SideKick menu by holding down the Alt key for several 
  28. seconds.  If, when the menu comes up, you select the next utility you want 
  29. with the Alt key combination, there is no problem, but if you let go of the 
  30. Alt key before making a selection, the DESQview menu will come up.  This is 
  31. normal since this is the default key DESQview uses to bring up its menu, if 
  32. you hit the ESC key at that point, you will go back to SideKick.  For most 
  33. people this is probably a "glitch" they can live with, but if you are not one 
  34. of those people, you must redefine the DESQview key (see manual) since there 
  35. is no way to redefine this key usage for SideKick.  Quarterdeck Technical 
  36. Bulletin #196, "Changing your DESQview System Keys", discusses this matter in 
  37. detail. 
  38.  
  39. Running SideKick Plus before DESQview:
  40.  
  41. The "Keyboard conflict" field of any PIF ("Change-A-Program") must be set to 8 
  42. for any window in which you wish to pop-up SideKick Plus.
  43.  
  44. Running SideKick Plus in a DESQview window as a non-resident program:
  45.  
  46. SideKick Plus provides a command line option "/G" for running SideKick Plus in 
  47. a non-resident mode.  It is generally suggested that this option be used when 
  48. loading SideKick Plus into a DESQview window.  Loaded in this fashion, 
  49. SideKick Plus will load and bring up its main menu.  When you exit SideKick 
  50. Plus, it is removed from memory.  In this mode, SideKick Plus runs as a 
  51. standard application in DESQview.  This is the mode that both Quarterdeck and 
  52. Borland recommend for running SideKick Plus in DESQview.
  53.  
  54. Running SideKick Plus in a window as a resident program:
  55.  
  56. SideKick Plus can also be used as a resident program within a DESQview window.  
  57. There are certainly potential conflicts when this is done, but it has been 
  58. tested with a limited number of programs and appears to work.  To run SideKick 
  59. Plus in a window with another program, make a batch file that first runs 
  60. SideKick Plus and then runs the other program.  To run a fairly full-sized 
  61. SideKick Plus, you need to allocate enough memory for the program plus xxK to 
  62. cover the resident overhead of SideKick Plus.  If you are running SideKick 
  63. Plus with a small program, you may have to allocate even more memory due to 
  64. the fact that SideKick Plus uses 256-440K when active.
  65.  
  66. When you pop up SideKick Plus in the window, it will swap a section of the 
  67. program running in that window out to disk or expanded memory and swap itself 
  68. in.  Please note, in general, your access to SideKick Plus will be much faster 
  69. if you take the preceding suggestion and load it in its own window and use 
  70. DESQview for your switching.
  71.  
  72. Communications in SideKick Plus:
  73.  
  74. The SideKick Plus manual (on page 353) indicates that SideKick Plus somehow 
  75. uses IRQ2 for communications.  It is unclear exactly what this means since the 
  76. normal hardware IRQ's for communications would be IRQ3 (Comm 2) and IRQ4 (Comm 
  77. 1).  IRQ2 is never used for a serial port in any configuration that we are 
  78. aware of.  In any case, SideKick communications seem to have problems in 
  79. DESQview versions prior to 2.2 which are due to the unconventional use of the 
  80. hardware interrupts.  We were able to work around some of these problems in 
  81. version 2.2 of DESQview, however SideKick Plus will still interfere with the 
  82. use of both COM ports concurrently.
  83.  
  84. Alternatives:
  85.  
  86. SideKick Plus offers some advantages over the original SideKick, but has some 
  87. disadvantages as well.  It is certainly not perfectly suited for use in an 
  88. environment such as DESQview.  You may want to consider sticking with the 
  89. original SideKick, which can be run before DESQview or resident in a window 
  90. (even in multiple windows).  You might want to consider the DESQview 
  91. Companions, which is a set of four utilities (Notepad, Calculator, Datebook 
  92. and Communications package) that have low memory overhead and are well 
  93. designed to run in DESQview.  Or you may want to consider WordPerfect's 
  94. Library programs.  These are also individual utility programs that run well in 
  95. DESQview since WordPerfect supports the DESQview screen call.
  96.  
  97.   ************************************************************************
  98.   *This technical note may be copied and distributed freely as long as it*
  99.   *is distributed in its entirety and it is not distributed for profit.  *
  100.   *         Copyright (C) 1988-92 by Quarterdeck Office Systems          *
  101.   ************************ E N D   O F   F I L E *************************
  102.